Retevis Earpiece Adapter, 2 Pin to 3.5mm Walkie Talkies Headset Adapter for Retevis H-777 RT21 RT22 RT27 RT28 RT68 RT19 RT18 H-777S Baofeng BF-888S Arcshell AR-5 BTECH Kenwood 2 Way Radios (1 Pack): Car Electronics

Retevis Earpiece Adapter, 2 Pin to 3.5mm Walkie Talkies Headset Adapter for Retevis H-777 RT21 RT22 RT27 RT28 RT68 RT19 RT18 H-777S Baofeng BF-888S Arcshell AR-5 BTECH Kenwood 2 Way Radios (1 Pack): Car Electronics
I purchased this to use with my Kenwood TH-D74 so that I could use stereo headphones to listen to my radio. I did not get it to use a headset with mic. It works for this, but BE AWARE: it is wired to use a four conductor headset. If you simply plug stereo headphones into it, it will short the transmit line and put the radio into transmit. If I plug in iPhone headphones (which include a mic), it works fine; I get good audio out of both ears and no transmit issue. I believe that this can be remedied if you get a CTIA to OMTP adapter so that the PTT line is not shorted out. I have one of those adapters on order to try right now. All in all, it does what it says. I bought it for a slightly different purpose than intended, so I'm not upset.
EDIT: That adapter did not work. Your best choice to use it like I wanted to is to buy a headset splitter adapter (splits into mic and headphone separately) or make your own adapter. Again, not a knock on the adapter as its not meant to do this, but thought some others might want to know!
Exactly as expected with one exception. First off, if you have a Baofeng UV-5 series radio and TRRS connector for headset with a mic it will work, it will not work with TRS (3 conductor with no mic) since it will key the radio while the headset it plugged in. Additionally, and this is something I'm continuing to track, it creates a ground loop on some radios (Baofeng UV-5 series) which cause the gain input for the signal to increase to the point of saturation. This is usually when there are more powerful radios around but I was hoping to use these as an inexpensive way to monitor radio traffic in busy areas but this doesn't seem to be the case. For me to get any headset to work with the radios, I have to make it myself. This is more of a limitation with the radio but this would be a very common use for this adapter.
I tried it on a Chinese handheld radio made by Retevis. (A great little 16 channel radio with totally programmable 400mhz frequencies, CTCSS and DTS, supporting repeater offsets.)
HOWEVER, it did not work on that very well, the Retevis thought the transmit button on the earbud was being pressed long after it was released. I have Boafeng radios too, so I will keep this for use on those (I have not tested it in them either.)
I thought it could be used to convert from that Kenwood/(Chinese)Boafeng&Retevis two-pin plug, where the audio out is on the small 2.5mm pin to a 3.5mm (1/8inch) plug for attaching 1/8 inch connectors to. But it would immediately go into transmit when I plugged in a stereo extension cable with nothing on the other end. SO even an open ended 1/8 inch plug will cause it to start transmitting.
I suppose it could depend on what type of earbuds you use. I tried a cheap Sony set and also an Apple pair, both with microphone of course. But it did the same on both.
The cables are amazing. They allow you to use your personal headphones (w/mic) on the Retevis radio. This allows you to use more comfortable earpieces with better sound quality (and noise reducing/cancelling headphones for louder environments like clubs). I bought one as a test unit, and the rest of the security staff and the owners of the club liked it so much we purchased several more.
We have used them with Samsung headphones, iPhone headphones, and multiple aftermarket headphones.
Great customer service, happy to see new products and improvements in 2 way radio communication. The only down side is having to hold the call answer to stop transmitting. Great product.
Price: US $12.99
Rating: 3.6 / 5.0 from 186 Reviews

Specification
2 pin standard diameter ear 2.5mm and 3.5mm stereo; space of two-pin 8mm for Retevis 2 way radios to adapt the standard 3.5mm female phone audio earpiece transfer cable
It transmits through phone button to transmit clear loud nature sound; supports two channels receiver of two ear plugs
Universal compatibility with most 3.5mm female phone audio headsets; it solves the problems of using the public walkie talkies inconvenience when you you don't have a walkie-talkie headset
Supports variety of brand mobile phone headset to achieve compatibility; so you can use your own headphones to talk on the walkie-talkie
Description
Read more
Universal compatibility
The 3.5mm connection adapter can be used for a variety of brand mobile phone headset to achieve compatibility. If you're tired of walkie talkies earpiece before, it provides clear and loud nature listening experience. If you want to use the FM radio function, just plug in your headphones, turn the radio and set to go.
Read moreIncredible durabilityWith the advanced Pu cable material; the connector is more stable and flexible to ensures an ultra-long lifespan. Wireless communication service expert around You. Light weight for packing during some outdoors sports. | Amazing Using ExperienceEasy to connect to your radios adapt to your headphones for quick communications.Customized design, great use; it's a wonderful item to your radio equipment. These are great for jobs where you want to keep a low profile.someone talking into a set of phone earbuds does not seem nearly as strange as someone seemingly talking to themselves, or into a radio. | ApplicationsWherever you need use your two way radios, you could bring this cable. Small and convenient for packing to use in some applications, such as: construction, restaurant, bars, warehouse, factory, Church, school etc. Ideal for camping, hunting, hiking, climbing, paintball and other outdoor activities. |

NOTE:
1. Adapter cablesuitable for RetevisH-777 RT21 RT22 RT27 RT7 H-777S RT28 RT68 RT19 RT18 Baofeng BF-888S Arcshell AR-5 BTECH.
If your walkie talkies is NOT in the list, please do not buy.
2. Avoid to use larger power(Better under 2 W)and strong signal walkie-talkie, so as not to affect the normal use of the product.
3. Applicable to VOX launch, but depends on the sensitivity of the headset microphone.
4. Press the call button on the headset(if your headset with this button), indicator light on walkie-talkie turn red, then you can use the microphone on the headset to speak.
BUT we suggest you use the walkie-talkie PTT to transmit.Because everytime you press the call button on the headset to transmit, you must long press the call button on the headset(10-15S) to make sure to stop transmitting after over speak. Then the indicator light on walkie-talkie turn off, this time walkie-talkie go to standby mode.
Package Includes:
1 x Retevis 2 Pin to 3.5mm Adapter Cable
1 x User Manual
![]() | ![]() | ![]() | ![]() | ![]() | ![]() | |
---|---|---|---|---|---|---|
Retevis 2 Pin to 3.5mm Adapter | Retevis 3.5mm Receiver/Listen Only Earpiece | Retevis 2 Pin G Type Length Adjustable Headset | Retevis RT21 Battery | Retevis 5-Port USB Wall Charger | Retevis AL-800 SMA-F Antenna | |
Plug Type | Kenwood 2 pin/3.5mm | 1 Pin 3.5MM | Kenwood standard 2 pin | USB | ||
Special Feature | Connect Wakile and Cellphone headset | Adjustable Cord; Acoustic Tube | G type earhook; Adjustable Cable | Overcharge protection; multi-protection | Supports PowerIQ and voltage boost that provides the maximum charging speed | Dual Band; Short Antenna; High Gain |
Compatibility | Retevis H-777 RT21 RT22 H-777S etc | Motorola: CP200 XLS, GP300, EP450 r radio speakers Mic with 3.5mm phone jack | Retevis H-777 RT21 RT22 H-777S etc | Retevis RT21Walkie Talkies | Retevis RT7 RT22 H-777 Motorola T200 T260 Cobra CX190 etc | RETEVIS H-777 RT21;Baofeng BF-888S BF-UV5R etc |
Package Includes | 5 pcs | 1 piece | 10 pcs | 5 pcs | 1 piece | 1 piece |
Wouldn't work for my radio and mic.
Works great with my retevis walkie. Construction is a little cheap though. Already starting to fall apart and expose wiring. I've had to super glue joints and use some rubber bands to hold things together. They have great customer service they sent a replacement at no charge. Thanks
Worked perfectly with the Baofeng radio to my I'm helmet earphones and microphone.
Product information
Technical Details
Item Weight | 0.704 ounces |
---|---|
Product Dimensions | 7.08 x 4.4 x 0.5 inches |
Item model number | FC9061A |
Is Discontinued By Manufacturer | No |
Weight | 18.14 Grams |
Additional Information
ASIN | B078KJKK2C |
---|---|
Customer Reviews | 3.6 out of 5 stars186 ratings 3.6 out of 5 stars |
Best Sellers Rank | #88 in Two-Way Radio Headsets & Microphones |
Date First Available | December 22, 2017 |
Warranty & Support
Product Warranty:For warranty information about this product, please click hereFeedback

Tidak ada komentar:
Posting Komentar